REMOTE CONTROL MANAGEMENT

WEB BASED MANAGEMENT SYSTEM
m2m TECHNOLOGY APPLIED TO GENSET

The Ascot Remote Control is a Web Management system that permits to remotely monitor and control all the hybrid/generators spread out in the territory.
By a simple internet connection, the operator can monitor in real time the performance of each hybrid/generator while powering the loads.
The hybrid/generator controller is connected to the web by a local area network (LAN) protocol/ RS485or by 2/3G modem with dual sim (IP501).
Data collected in the IP501 are trasmitted in to the web and accessible in www. ascot-remotecontrol.com portal which provides power monitor, control
data analysis and management function across an entire network of sites.
The Ascot portal provides the possibility of monitoring large systems with hundreds or thousands of devices.

RELIABLE AND EASY TO USE

6 years of proven experience monitoring thousand of machines in real time worldwide;

MULTI-USER ACCESS

The IP501 has an access system with different Licenses: User and Administrator (unlimited functions). The users can be added to groups;

TREND GRAPHS

Ability to view trends in engine rpm, engine , temp., starter battery VDC, output power, fuel level;

GPS MAP

By the GPS antenna you can locate the hybrid/gensets; RED  flags are signaling a Failure Status, while GREEN  flags signaling proper Operation Mode;

REAL TIME ALARM COMMUNICATION

All alarms, if occured, are communicated via SMS, voice or e-mail.

 
REAL TIME USER FRIENDLY REPORT

This functionalty allows to generate performance reports for single or groups of machines. It is possible to select a range of dates (weeks or months): the report is based on daily average.


WORLD MAP WITH INSTALLATIONS

By a user-friendly interface, it is possible to see each product’s location worldwide. By a click it is possible to access to data referring to each site

Download

pdf-icon Remote Control Catalogue