Ascot’s Remote Control is a Remote Management System (RMS) that monitors continuously all relevant parameters of the system and manages all the hybrid/generators spread out in the territory.
The information is collected by the modem and it is stored in the internal memory. Through a laptop or mobile device connected to the NET, you can monitor and manage all the data, including start, stop and reset functionalities, without installing a specific software.
The remote controller is transmitted to the web by a local area network (LAN) protocol/ RS485 or by 4/5G modem with dual sim. Data collected are trasmitted to the web and accessible in www.ascotremotecontrol.com portal which provides power monitor, control data analysis and management function across an entire network of sites.
10 years of proven experience monitoring thousands of machines in real time worldwide
The IP501 has an access system with different Licenses: User and Administrator (unlimited functions). The users can be added to groups
Ability to view trends in engine rpm, engine, temp., starter battery VDC, output power, fuel level
By the GPS antenna you can locate the hybrid/gensets; RED flags are signaling a Failure Status, while GREEN flags signaling proper Operation Mode
All alarms, if occurred, are communicated via SMS, voice or e-mail
This functionality allows generating performance reports for single or groups of machines. It is possible to select a range of dates (weeks or months): the report is based on daily average
By a user-friendly interface, it is possible to see each product’s location worldwide. By a click, it is possible to access to data referring to each site